Products

With over two decades of manufacturer experience in Plastic Car Fuel Injector Housing Mould, K-SHOW has launched plastic injector housing molds with a pressure resistance of over 8 MPa for gasoline direct injection and high-pressure common rail platforms. The mold features an integrated solution of sequential valve needle hot runner and 3D conformal cooling.

With over two decades of experience in Plastic Car Glove Box Mould, K-SHOW provides low-stress, low-noise, and high-durability integrated injection molds for glove box assemblies targeting mid-to-high-end platforms. The mold features a sequential valve needle hot runner and a low-pressure double-layer ejection structure. A single molding process can meet the assembly size tolerance of ≤ ±0.25 mm and 30,000 hinge fatigue cycles without cracking.

KSHOW is a professional manufacturer of Plastic Car Roof Handle Mould in China.Through micron-level machining of high-precision mold steel S136 and H13, it achieves integrated molding of functional units such as the handle body, buckles, axis seats, and ribs. By integrating CAE melt simulation and IATF 16949 quality standards, it ensures that the molds meet safety performance and assembly accuracy requirements throughout their life cycle of over 800,000 cycles.

KSHOW has 22 years of experience in mold injection molding and specializes in the production of Plastic Car Armrest Box Mould. The processing materials include PP-T40, ABS/PC+ABS, PA6+GF30. The torque attenuation of the slider is less than 8%, and the noise of the slide rail is ≤35 dB(A). We offer OEM and seat suppliers armrests that are noiseless, gap-free, and require no post-assembly adjustment.

For more than 20 years K-SHOW has concentrated on Plastic Car Door Panel Mould, specializing in one-shot plastic door-inner panels. Built to 2.0 mm wall-thickness, ≤0.15 mm profile accuracy and an 800,000-shot life, every tool is production-ready after only 30 days, giving OEM and Tier-1s interior panels that are dimensionally stable, grain-matched and need zero line-side adjustment.

K-SHOW is Plastic Car Headlight Housing Mould manufacturer and supplier, delivering over 320 lens mould with a production life starting at 500,000 shots.We process optical-grade PC, PMMA, and MS resins, keeping optical distortion ≤ 15′ and haze < 1%, with single-cavity cycles ≤ 55 s. We supply OEM and Tier-1s with lenses that are stress-line-free, sink-mark-free and require zero optical re-alignment.